Allied HO-PAC 4000 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 44

Allied HO-PAC 4000 Скачать руководство пользователя страница 17

Allied Construction Products, LLC www.alliedcp.com

7

TM574173_HP4000_18feb

6.0 Mounting Information

6.1.2 Flat–Top Frame and Mounting Bracket

Fig. 6-1 Flat-Top Frame

Fig. 6-2 Mounting Bracket – Pin-on Design

6.1.1 Flat-Top Frame

The design of the Top Frame is illustrated in Fig. 6-1.
With the bucket removed from the carrier and the
mounting bracket (Fig. 6-2) bolted to the top frame,
the Ho-Pac is ready to be attached to the carrier.

6.1.2 Mounting Bracket for Flat–Top Frame

A pin-on style of mounting bracket is illustrated in Fig.
6-2. The mounting bracket is bolted to the connection
plate located at the upper end of the frame.
Dimensions of the connection plate, including
thickness, spacing, quantity and diameter of the bolt
holes, will vary between small, medium and large
size Allied attachments. Connection plates are
separated by size and grouped into Allied mounting
families.

Mounting brackets are interchangeable for use with
other Allied work tools, including hydraulic breakers
that share the same bolt pattern family.

Allied offers an array of bolt-on mounting brackets to
fit virtually any carrier, including those equipped with
pin-grab or hook-type mounting couplers. The
carrier’s bucket pins will be used whenever possible.

IMPORTANT

The Ho-Pac does not include a mounting bracket.
Order separately. Bracket design is carrier
specific. The carrier’s bucket pins will be used
whenever possible. Ordering requires complete
information about the carrier, including make,
model, series and serial number. If equipped with
a quick coupler, additional information is required.
Make, model, series and serial number.

In Table 6.1, the mounting ‘Family’ designates a
sizing system used by Allied to identify various
connection plates. Other Allied work tools, including
the Hy-Ram breakers, share these same mounting
Families.

Figures and descriptions represent standard
configurations.

Table 6.1 Mounting Bracket for Flat Top Frame

Flat-Top Frame

Mounting Bracket

Bolt Set

Mounting Family LR9

LR9

Included with Ho-Pac

The mounting bracket is not included with the Ho-Pac. Order separately.

«
...
15
16
17
18
19
...
»

Содержание HO-PAC 4000













































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды