Quick start with Direct FirePackage
GUPPY Getting Started
V4.0.1
34
If the html page does not open, go in the root directory of the CD and
doubleclick
index.htm
.
2.
On the html page scroll down to the software section
AVT Direct
FirePackage.
3.
On the html page click the following links to read the corresponding
documents:
– Release Notes
– Programmers Manual
– Documentation ActiveX-Controls (English)
– Introduction of WDM (English)
4.
To start the installation of Direct FirePackage:
on the html page click on
Setup (complete with DirectX9 Installation)
or
in the CD tree doubleclick
<CD ROM>:\products\wdm\WDM_140805\DirectFire Package.exe
A window opens.
5.
Choose language and click
OK
.
A wizard will guide you through the installation. To continue click
Next
in each window.
6.
Click
Next
.
7.
Enter your
Full Name
and
Organization
and click
Next
.
8.
Choose
Typical
and click
Next
.
The program is being installed. Files are copied. This will take some
time.
A hardware installation message window opens.
9.
Click
Continue Anyway
.
10. In the DOS box: Press any key!
11. Click
Finish
.
Now the
Direct FirePackage
and the
SmartView for WDM
program are
installed on your PC or laptop.