Quick start with FirePackage
GUPPY Getting Started
V4.0.1
28
Licensing
You need a license to run the FirePackage. This license is embedded in each
AVT camera. It will be read out with the help of the license file
LICENSE.TXT
.
A typical license file for AVT cameras looks like this:
* FireControl License File
1EEAF9B450220075 Devicecontained Offset=F1000008 (AVT)
...
...
After the top line starting with *, each line contains one license. The line
after the top line is exactly as shown above.
The license file will be read from top to down until a valid license was found.
First steps with SmartView
1.
After connecting the camera with your PC or laptop, start
SmartView
program. In the
SmartView
window you see all FireWire adapters or
cards installed in your PC.
2.
In the
SmartView
window open all trees. Search for your camera and
doubleclick on the camera entry.
Note
L
•
LICENSE.TXT
and
FCTLMAIN.DLL
always have to be in
the same directory.
•
By default the DLLs are used from the Windows
System32 directory.
•
If
FCTLMAIN.DLL
is not in the Windows System32
directory, then FirePackage will look in the directory
where the Viewer (SmartView) is installed.
Note
L
For further information on licensing read the following:
<install dir>\Allied Vision Technologies\FirePackage\Doc\
Licensing.pdf
or ask your local dealer.
