Quick start with Direct FirePackage
GUPPY Getting Started
V4.0.1
33
Installing IEEE 1394 adapter
1.
PC: Install the IEEE 1394 adapter according to the instructions you got
from your adapter manufacturer.
Laptop: Insert the IEEE 1394 PC Card into your laptop.
Windows 2000/XP detects the hardware automatically and installs a
Windows 1394 driver.
Connecting camera to PC or laptop
1.
Insert one end of the FireWire cable into the 1394 adapter of your 1394
PC card.
2.
Insert the other end of the FireWire cable into your camera.
Under Windows XP the
Found New Hardware Wizard
window opens.
3.
Click
Cancel
.
Installing Direct FirePackage
1.
Insert the Camera Support CD in the CD ROM drive of your PC or laptop.
If the autostart function of your PC or laptop is enabled, an html page
will open.
Note
L
For further information about Direct FirePackage, ActiveX and
WDM open the following directory:
<CD ROM>:\products\wdm\WDM_xxyyzz\
Read the documents you find in this directory:
•
English
– ActiveX_eng.pdf (User Manual ActiveX Control)
– manual_eng.pdf (User Manual Direct FirePackage)
– WDM Introduction.pdf (Introduction of WDM)
•
German
– ActiveX.pdf (Benutzerhandbuch ActiveX Control)
– manual_ger.pdf (Handbuch Direct FirePackage)
– WDM Grundwissen.pdf (Grundwissen zu WDM)
Note
L
The
SmartView for WDM
program is also installed when you
install Direct FirePackage.