Quick start with FirePackage
GUPPY Getting Started
V4.0.1
26
Installing IEEE 1394 adapter
1.
PC: Install the IEEE 1394 adapter according to the instructions you got
from your adapter manufacturer.
Laptop: Insert the IEEE 1394 PC Card into your laptop.
Windows 2000/XP will detect the hardware automatically and installs a
Windows 1394 driver.
Installing FirePackage (incl. SmartView program)
1.
Insert the Camera Support CD in the CD ROM drive of your PC or laptop.
An html page will open if the autostart function of your PC or laptop is
enabled.
If the html page does not open, enter the root directory of the CD and
doubleclick
index.htm
.
2.
Scroll down to the software section
AVT FirePackage.
3.
Click the following links to read the corresponding documents:
– AVT FirePackage Overview
– Release Notes FirePackage
– Release Notes SmartView
4.
To start the installation of FirePackage click on
AVT FirePackage x.y.zip
A window opens.
5.
Choose
Save to Disk
and click
OK
.
6.
In the next window choose a directory and click
Save
.
7.
Unzip the file.
8.
Doubleclick on
setup.exe
.
Note
L
Before installing FirePackage, open the following directory:
<CD ROM>:\products\AVTFirePackage...\
Read the documents you find in this directory:
•
AVT_FirePackage_x_y_Release_notes.pdf
•
AVT_FirePackage_Overview.pdf
•
AVT_SmartView_x.y.z_Release_notes.pdf
Note
L
When you install FirePackage the SmartView program will
automatically be installed.
Alternatively you can install the Direct FirePackage (then a
special Viewer will be installed: see HTML-Help from this
viewer).
