Allied Vision Technologies F-201B AVT Dolphin Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 72

Allied Vision Technologies F-201B AVT Dolphin Скачать руководство пользователя страница 59

59

9.1.11

Video mode control and status registers for Format_7

The offset to the base address is in V_CSR_INQ_7_x. The offset entered 100h must be
added for

Mode 1

, 200h for

Mode 2

200h and 300h for

Mode 3

.

Offset

Name

Notes

000h MAX_IMAGE_SIZE_INQ
004h UNIT_SIZE_INQ

008h IMAGE_POSITION

00Ch IMAGE_SIZE See

above

010h COLOR_CODING_ID

See

above

014h COLOR_CODING_INQ

See

above

034h PIXEL_NUMER_INQ

038h TOTAL_BYTES_HI_INQ

03Ch TOTAL_BYTES_LO_INQ

040h PACKET_PARA_INQ

See

above

044h BYTE_PER_PACKET

See

above

L

For all modes in Format_7

ErrorFlag_1

and

ErrorFlag_2

are refreshed on each access

to the Format_7 Register.

L

Contrary to IIDC DCAM v. 1.3 registers relevant to Format_7 are refreshed on each
access. The “Setting_1” bit is automatically cleared after each access.

L

When

ErrorFlag_1

or

ErrorFlag_2

is set and Format_7 is configured, no image capture

is started.

L

Contrary to IIDC v.1.3 COLOR_CODING_ID is set to a default value after an
INITIALIZE or “reset”.

L

Contrary to IIDC DCAM v.1.3 the

UnitBytePerPacket

field is already filled in with a

fixed value in the PACKET_PARA_INQ register.

9.2

Advanced features

The camera has a variety of extended features going beyond the possibilities described
in IIDC v. 1.3.

Advanced features should always be activated before accessing them.

The color and B/W models of the camera vary in the availability of some advanced
features.

L

Currently all registers can be written without being activated. This makes it easier to
operate the camera using “Directcontrol”.

L

AVT reserves the right to require activation in future versions of the software.

«
...
57
58
59
60
61
...
»

Содержание F-201B AVT Dolphin









































































Отзывы:

Нет отзывов