Allied Vision Technologies F-201B AVT Dolphin Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 72

Allied Vision Technologies F-201B AVT Dolphin Скачать руководство пользователя страница 38

38

7.10

Deferred image transport

An image is normally captured and transported in consecutive steps. The image is
taken, read out from the sensor, digitized and sent over the 1394 bus.

This order of events can be paused or delayed by using the

deferred image transport

feature. 2 modes are available. Both can also be used at the same time – but only in
Format_7.

7.10.1

HoldImg mode

By setting the

HoldImg

flag transport of the image over the 1394 bus is stopped

completely. All captured images are stored in the internal ImageFIFO. The camera
reports the maximum possible number of images in the FiFoSize variables.

L

Pay attention to the maximum number of images that can be stored in FIFO. If you
capture more images than the number in FiFoSize, the oldest ones are overwritten.

L

The extra

SendImage

flag is set to “true” to import the images from the camera. The

camera sends the number of images that are entered in the

NumOfImages

parameter.

L

If

NumOfImages

is “0” all images stored in FIFO are sent.

L

If

NumOfImages

is not “0”, the corresponding number of images are sent.

L

If the

HoldImg

field is set to “false”, all images in

ImageFIFO

are deleted. No images

are sent.

7.10.2

FastCapture

This mode can be activated in Format_7 only.

When

FastCapture

is set to “false”, the maximum frame rate is associated with the

packet size set in the BYTE_PER_PACKET register. The lower this value, the lower the
attainable frame rate.

By setting

FastCapture

to “true“ all images are recorded at the highest possible frame

rate, i.e. the setting above does not effect the frame rate.

«
...
36
37
38
39
40
...
»

Содержание F-201B AVT Dolphin









































































Отзывы:

Нет отзывов