Allied Telesis Tornado 562 S II Скачать руководство пользователя | Manualshive

Страница: 104 / 121

background image

180 CONNECT 28000 The modem has connected to the line at 28000 bps and DCE SPEED reporting is enabled.

181 CONNECT 29333 The modem has connected to the line at 29333 bps and DCE SPEED reporting is enabled.

182 CONNECT 30667 The modem has connected to the line at 30667 bps and DCE SPEED reporting is enabled.

183 CONNECT 33333 The modem has connected to the line at 33333 bps and DCE SPEED reporting is enabled.

184 CONNECT 34667 The modem has connected to the line at 34667 bps and DCE SPEED reporting is enabled.

185 CONNECT 37333 The modem has connected to the line at 37333 bps and DCE SPEED reporting is enabled.

186 CONNECT 38667 The modem has connected to the line at 38667 bps and DCE SPEED reporting is enabled.

187 CONNECT 41333 The modem has connected to the line at 41333 bps and DCE SPEED reporting is enabled.

188 CONNECT 42667 The modem has connected to the line at 42667 bps and DCE SPEED reporting is enabled.

189 CONNECT 45333 The modem has connected to the line at 45333 bps and DCE SPEED reporting is enabled.

190 CONNECT 46667 The modem has connected to the line at 46667 bps and DCE SPEED reporting is enabled.

191 CONNECT 49333 The modem has connected to the line at 49333 bps and DCE SPEED reporting is enabled.

192 CONNECT 50667 The modem has connected to the line at 50667 bps and DCE SPEED reporting is enabled.

193 CONNECT 53333 The modem has connected to the line at 53333 bps and DCE SPEED reporting is enabled.

194 CONNECT 54667 The modem has connected to the line at 54667 bps and DCE SPEED reporting is enabled
.
195 +MRR: 28000 The modem has connected to the line at 28000 bps and carrier reporting is enabled. (See S95

and Xn.)

196 +MRR: 29333 The modem has connected to the line at 29333 bps and carrier reporting is enabled. (See S95

and Xn.)

197 +MRR: 30667 The modem has connected to the line at 30667 bps and carrier reporting is enabled. (See S95

and Xn.)

198 +MRR: 33333 The modem has connected to the line at 33333 bps and carrier reporting is enabled. (See S95

and Xn.)

199 +MRR: 34667 The modem has connected to the line at 34667 bps and carrier reporting is enabled. (See S95

and Xn.)

200 +MRR: 37333 The modem has connected to the line at 37333 bps and carrier reporting is enabled. (See S95

and Xn.)

201 +MRR: 38667 The modem has connected to the line at 38667 bps and carrier reporting is enabled. (See S95

and Xn.)

202 +MRR: 41333 The modem has connected to the line at 41333 bps and carrier reporting is enabled. (See S95

and Xn.)

203 +MRR: 42667 The modem has connected to the line at 42667 bps and carrier reporting is enabled. (See S95

and Xn.)

204 +MRR: 45333 The modem has connected to the line at 45333 bps and carrier reporting is enabled. (See S95

and Xn.)

205 +MRR: 46667 The modem has connected to the line at 46667 bps and carrier reporting is enabled. (See S95

and Xn.)

206 +MRR: 49333 The modem has connected to the line at 49333 bps and carrier reporting is enabled. (See S95

and Xn.)

207 +MRR: 50667 The modem has connected to the line at 50667 bps and carrier reporting is enabled. (See S95

and Xn.)

208 +MRR: 53333 The modem has connected to the line at 53333 bps and carrier reporting is enabled. (See S95

and Xn.)

209 +MRR: 54667 The modem has connected to the line at 54667 bps and carrier reporting is enabled. (See S95

and Xn.)

Notes:

1.

See Vn for result code selection, i.e., short form (result code) or verbose/extended (result message).

2.

See Wn for extended connect message control.

3.

See S95 for extended result code enabling options (which override some Wn commands).

4.

See Xn for extended result code subset enabling options.

5.

See +MR for modulation reporting control.

«
...
102
103
104
105
106
...
»

Содержание Tornado 562 S II


























































































































Отзывы:

Нет отзывов

Похожие инструкции для Tornado 562 S II

Бренд: D-Linke Страницы: 32

Бренд: Zonet Страницы: 10

Бренд: Samsung Страницы: 65

Бренд: BSS Audio Страницы: 20

Бренд: Funkwerk Страницы: 2

Бренд: NETGEAR Страницы: 84

Бренд: 1&1 Страницы: 32

WNFB-265AXI(BT)

Бренд: Sparklan Страницы: 14

Бренд: Caen Страницы: 14

LonWorks Communication Module LN-01

Бренд: Delta Electronics Страницы: 1

Бренд: IBM Страницы: 130

Бренд: RR-Concepts Страницы: 12

Fast EtherLink XL PCI 10/100BASE-TXNetwork Interface...

Бренд: 3Com Страницы: 12

Бренд: 8e6 Technologies Страницы: 94

Wisenet XRN-6410DB4

Бренд: Hanwha Techwin Страницы: 118

Gen3 Ethernet Module

Бренд: NCD Страницы: 18

Бренд: 3Com Страницы: 63

Бренд: Martin Страницы: 41

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды