Allied Telesis AT-AR3050S, Руководство по установке

Страница: 53 / 80

Installation Guide for AT-AR3050S, AT-AR4050S Routers
19
Installing the Router on a Table or Desktop
You may install the routers on a table or desktop. Here are the guidelines
to selecting a site.

The table should be level and stable.

The power outlet should be located near the routers and be easily
accessible.

The site should allow for easy access to the ports on the front of
the routers, so that you can easily connect and disconnect cables,
and view the port LEDs.

The site should allow for adequate air flow around the units and
through the cooling vents on the front and rear panels. (The
ventilation direction is from front to back, with the fan on the back
panel drawing the air out of the unit.)

The site should not expose the routers to moisture or water.

The site should be a dust-free environment.

The site should include dedicated power circuits or power
conditioners to supply reliable electrical power to the network
devices.

The rubber feet on the bottom of the routers should be left on for
table or desktop installation.
Warning
Do not stack routers on top of one another on a table or desktop
because that could present a personal safety hazard if you need to
move or replace routers.
After placing the router on the table or desktop, go to Chapter 4, “Cabling
the Networking Ports” on page 37 to connect the network cables to the
ports on the router.