Allied Telesis AlliedWare Plus 5.2.1, Руководство по программному обеспечению

Страница: 704 / 1294

Route Map Commands
©2008 Allied Telesis Inc. All rights reserved.
32.12 AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E Software Version 5.2.1
match tag
Use this command to add a tag match clause to a route map entry. Specify the route tag value
to match.
An OSPF route matches the route map if it has been tagged with the route map’s tag value.
Routes can be tagged through OSPF commands or through another route map’s set clause.
Each entry of a route map can only match against one tag in one match clause. If the route map
entry already has a tag match clause, entering this command replaces that match clause with
the new clause.
Note that this clause only determines whether the route map checks OSPF routes for the given
tag value. The route map action and its
set clauses determine what the route map does with
routes that have that tag.
Use the no parameter to remove the tag match clause from the route map entry.
Syntax
match tag
<0-4294967295>
no match tag
Mode
Route-map mode
Usage
This command is valid for OSPF routes only.
Examples
To add entry 10 to the route map called “mymap1”, which will process routes that are tagged
“100”, use the commands:
awplus(config)#route-map mymap1 permit 10
awplus(config-route-map)#match tag 100
Related Commands
match interface
match ip address
match ip next-hop
match route-type
route-map
set tag
show route-map