manualshive.com logo in svg

Allied Telesis AlliedWare Plus 5.2.1, Руководство по программному обеспечению, Страница: 374 / 1294

Поделиться
Скачать
Allied Telesis AlliedWare Plus 5.2.1 Скачать руководство пользователя страница 374

Link Aggregation Commands

©2008 Allied Telesis Inc. All rights reserved.

21.10

AlliedWare Plus

TM

 Operating System Software Reference  C613-50003-00 REV E

Software Version 5.2.1

 

static-channel-group

Use this command to create a static channel group (also known as a static aggregator), or add 
a member port to an already-existing static channel group. Use the 

no

 parameter with this 

command to remove the switch port from the static channel group.

Syntax

static-channel-group <1-31>

no static-channel-group

Mode

Interface mode

Usage

This command adds the switch port to the static channel group with the specified channel 
group number. If the channel group does not exist, it is created, and the port is added to it. The 

no

 prefix detaches the port from the static channel group. If the port is the last member to be 

removed, the static channel group is deleted.

All the ports in a channel group must have the same VLAN configuration: they must belong to 
the same VLANs and have the same tagging status, and can only be operated on as a group.

Once the static channel group has been created, it is treated as a switch port, and can be 
referred to in other commands that apply to switch ports.

To refer to a static channel group in other static channel group commands, use the channel 
group number. To specify a static channel group in other commands, prefix the channel group 
number with 

sa

. For example, ‘sa3’ refers to the static channel group with channel group 

number 

3

.  

For more on static channel groups, see 

“Static Channel Groups” on page 14.11

 and 

Chapter 20, Link Aggregation Configuration

. 

Example

To define a static channel group on a switch port apply the example commands shown below:

Related Commands

show static-channel-group

Parameter

Description

<1-31>

 Channel group number. 

awplus#

configure terminal

awplus(config)#

interface port1.1.6

awplus(config-if)#

static-channel-group 3

Содержание AlliedWare Plus 5.2.1















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов