Allied Telesis AlliedWare Plus 5.2.1, Руководство по программному обеспечению, Страница: 127 / 1294

System Configuration and Monitoring Commands
©2008 Allied Telesis Inc. All rights reserved.
Software Version 5.2.1 AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E 8.5
clock summer-time recurring
This command defines the start and end of summertime for every year, and specifies
summertime’s offset value to Standard Time.
The no parameter removes the device’s summertime setting. This clears both specific
summertime dates (set with the clock summer-time date command on page 8.4 ) and
recurring dates.
By default, the device has no summertime definitions set.
Syntax clock summer-time ZONENAME recurring START-WEEK START-DAY START-MONTH
START-TIME END-WEEK END-DAY END-MONTH END-TIME <1-180>
no clock summer-time
Mode
Configure mode.
Examples
To set a summertime definition for New Zealand using NZST (UTC+12:00) as the standard
time, and NZDT (UTC+13:00) as summertime, with summertime set to start on the 1st
Sunday in October, and end on the 3rd Sunday in March, use the command:
Parameter Description
ZONENAME A description of the summertime zone, up to 6 characters long.
recurring Specifies that this summertime setting applies every year from now on.
START-WEEK Week of the month when summertime starts, in the range 1-5. The value
5 indicates the last week that has the specified day in it for the specified
month. For example, to start summertime on the last Sunday of the
month, enter
5 for START-WEEK and sun for START-DAY.
START-DAY
Day of the week when summertime starts. Valid values are mon , tue ,
wed , thu , fri , sat or sun .
START-MONTH
First three letters of the name of the month that summertime starts.
START-TIME
Time of the day that summertime starts, in the 24-hour time format
HH:MM.
END-WEEK
Week of the month when summertime ends, in the range 1-5. The value
5 indicates the last week that has the specified day in it for the specified
month. For example, to end summertime on the last Sunday of the
month, enter
5 for END-WEEK and sun for END-DAY.
END-DAY
Day of the week when summertime ends. Valid values are mon , tue ,
wed , thu , fri , sat or sun .
END-MONTH
First three letters of the name of the month that summertime ends.
END-TIME
Time of the day that summertime ends, in the 24-hour time format
HH:MM.
<1-180> The offset in minutes.
awplus(config)#
clock summer-time NZDT recurring 1 sun
oct 2:00 3 sun mar 2:00 60