Allied Systems AW3CP1A1556R11, Руководство по эксплуатации

Страница: 34 / 60

20
INTERVAL PROCEDURE OR QUANTITY SPECIFICATION
50 hours or weekly* Check oil level at plug (item 1). Add oil as
necessary through fi ll plug (item 2).
Do not
operate tractor when checking the oil
level.
See Figure 3, Approved Oil List.
Clean the breather (item 6). Remove debris around breather. Clean
the breather with solvent if necessary.
Lubricate the rollers on the integral arch
or the fairlead assembly, if the winch is
equipped with either of these options. Use multi-purpose grease with 2-4%
molybdenum disulfi de.
500 hours or every 3
months Clean the oil strainer.* Use liquid gasket
between the cover and strainer housing
(item 4). See parts manual for oil strainer part
number.
Check the winch control lever linkage
adjsutment. Check that the lever mounting bracket
and linkage are fastened correctly.
Tighten the bolts as necessary.
1000 hours or every 6
months Change the hydraulic oil. Drain oil from plug
(item 3). Clean the strainer. Add 5.5 gallons
(20.8 liters)** through fi ll plug (item 2). Check
the oil level at oil level check plug (item 1). See Figure 3, Approved Oil List.
* NOTE: Clean the oil strainer screen after the fi rst 50 hours on new and rebuilt winches.
** Amount of oil may vary slightly with tractor.
Figure 13 - Maintenance Schedule