Allied Systems AW3CP1A1556R11, Руководство по эксплуатации

Страница: 16 / 60

2
Figure 1 - Nameplate
The winch has a gear assembly inside the drum. The
inner gear can slide on splines and is engaged with the
outer gear by a spring. When the control lever is in the
FREESPOOL position the inner gear is disengaged from
the outer gear by a hydraulically actuated piston. Only
the drum rotates when the gear assembly is disengaged.
The W3C winch has a maximum line pull of 41,200 lbs.,
rated at 30,000 lbs.
Nameplate
Each winch is shipped from the factory with a nameplate
as shown in Figure 1. The rated capacity for the winch, as it
is equipped, is shown on the nameplate. Each winch must
be operated within its rated capacity. If the nameplate is
missing, or the wire rope does not match the information
on the nameplate, do not operate the winch until its
capacity is known.