background image

Rev. 5/12/2017 

   LIFTER-2, MANUAL 

Copyright 2017 Vestil Manufacturing Corp.                                                               Page 1 of 7 

 

 

 

                 

 

 

 
 

Lifter-2 Worksite Lift 

Instruction Manual

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

Receiving instructions: 

 

After delivery, remove the packaging from the product. Inspect the product closely to determine 

whether it sustained damage during transport. If damage is discovered, record a complete description of 
it on the bill of lading. If the product is undamaged, discard the packaging.

 

 

NOTE:

 

   The end-user is solely responsible for confirming that product design, installation, use, and 
maintenance comply with laws, regulations, codes, and mandatory standards applied where the product 
is used.

 

 

 

Vestil Manufacturing Corp. 

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 

Telephone: (260) 665-7586  -or-  Toll Free (800) 348-0868 

Fax: (260) 665-1339 

Website: 

www.vestilmfg.com

     e-mail: 

[email protected]

 

 
 
 

Table of Contents 

Signal Words……………………………………………….………………………………………………………… 2 
Hazards of Improper Use………………………………………………..………………………….….................. 2 
Assembly and use Instructions………………..………..………..……………………………………….............. 3 
Loading the lifter……………………………………………………...…………………………………….............. 4 
Inspections & Maintenance…………………………………………………………………................................. 4 
Exploded Parts Diagram and Bill of Materials……………………………………………………………………. 5 
Label placement diagram …………………………………………………………............................................. 6 
Limited warranty……………………………………………………………………………………………….…….. 7 

Содержание Lifter-2








Отзывы: