Allied Systems AW3CP1A1556R11, Руководство по эксплуатации

Страница: 12 / 60

x
• If applying tension to the wire rope manually during
spooling:
»
ensure that the operator is winching in slowly,
»
keep your hands and clothing well clear of any
rollers or the winch drum,
»
do not maintain tension by letting the wire rope
slip through your hands,
»
use a hand-over-hand technique to maintain
tension.
• Be aware of the ground conditions, and make sure
the ground and tractor are stable enough to pull
the intended load.
• Do not attempt to pull loads in excess of the rated
capacity of the winch.
• Keep yourself informed of any applicable codes,
regulations and standards for the job.
• This winch is not rated for any application involved
in the lifting or moving of personnel.
• Use only the lubricants listed in the Recommended
Oil List. See Page 4.
• Do not weld on any part of the winch. Contact Allied
Systems if weld repairs are needed.
• The hydraulic system must be kept clean and free
of contamination at all times.
• Be aware of the hazards of pressurized hydraulics:
»
Wear personal protective equipment, such as
gloves and safety glasses, whenever servicing
or checking a hydraulic system.
»
Assume that all hydraulic hoses and components
are pressurized. Relieve all hydraulic pressure
before disconnecting any hydraulic line.
»
Never try to stop or check for a hydraulic leak
with any part of your body; use a piece of
cardboard to check for hydraulic leaks.
»
Small hydraulic hose leaks are extremely
dangerous, and can inject hydraulic oil under
the skin, even through gloves.
»
Infection and gangrene are possible when
hydraulic oil penetrates the skin. See a doctor
immediately to prevent loss of limb or death.