Allied Systems AW3CP1A1556R11, Руководство по эксплуатации

Страница: 52 / 60

38
B. Moving up the slope:
1. Set the throttle on the tractor for the required engine
speed.
2. Put the direction lever in LINE-IN and the power
lever to POWER-IN/OUT to tighten the winch wire
rope. When the winch wire rope is tight, put the
tractor transmission in the
FIRST speed range and
REVERSE and engage the tracks or drive wheels. At
the same time, put the direction lever in LINE-IN and
the power lever in POWER-IN/OUT .
3. Use the steering on the tractor to keep the travel of
the tractor in line with the winch wire rope.
4. Fully engage LINE-IN as necessary. Do not permit the
winch wire rope to loosen and pass under the drive
wheels or tracks of the tractor.
Other Equipment is Down the Slope (See Figure 20).
In this operation, the tractor and winch are on stable
ground and other equipment is working on a steep
slope. The winch is used to give additional control to
the equipment working on the steep slope. A winch with
a fairlead option is recommended for this operation if
alignment of the other equipment with the winch and
tractor is a problem.
Make sure the tractor and winch are on stable ground and
will not slide when the load is applied. Align the tractor and
winch with the load. Apply the parking brake on the tractor.
Figure 20 - Other Equipment on a Steep Slope