Chapter 2: LED Indicators and back panel
Page
5
2 LED Indicators and back panel
Before you begin with the installation, please take a moment to become more
familiar with the LED indicators and back panel of the CopperJet.
2.1 CopperJet 816/817 LED indicators
Phone:
The Phone led will blink when the connected POTS phone receives an
incoming call. During a analogue modem connection, blinking
indicates that echo cancellation is switched off.
The Phone led illuminates when the connected POTS phone is off-
hook.
USB:
The USB led will illuminate when you connect the CopperJet to the
USB port on your PC, and the USB drivers are installed.
Eth:
The Ethernet led will illuminate when you connect the CopperJet to
the Ethernetport on the PC or hub/switch.
ADSL:
Blinking indicates that the DSL protocols starts handshaking.
Illuminates when the ADSL network is correctly configured and
connected.
Power:
When the CopperJet is connected to a power source, the Power LED
will illuminate.
2.2 CopperJet 816/817 back panel
PWR
USB
LINE
ETH
1
2
3
4
Phone
Back panel
PWR:
Only the power adapter that comes with the package can be
connected to the power jack.
PHONE:
To connect your POTS Telephone to the CopperJet.
LINE:
To connect the CopperJet to the ADSL line of your provider.
