Chapter 5: Configuring the CopperJet
Page
29
5.4.4 Configuring PPPoE routed
PPPoE routed is mostly used when your Service Provider has an Ethernet network
which requires authentication (username and password).
You need to add detailed configuration information about the WAN service that
you are creating. Your service provider must provide this information.
Description:
PPPoE, this is the default WAN connection name.
VPI:
Virtual Path Identifier. A field in the ATM header. The
VPI is used to identify the virtual path that a circuit
belongs to. The VPI can be any value between 0 and
4095.
VCI:
Virtual Channel Identifier. Part of the ATM header.
The VCI is a tag that identifies which channel a cell
will travel over. The VCI can be a value between 1
and 65535.
Encapsulation:
LLC/SNAP by default.
