Chapter 5: Configuring the CopperJet
Page
21
For PPPoA, select the PPP tab. For PPPoE, select the PPPoE tab.
Be sure that following options are set to true if you want the CopperJet to
automatically discover the DNS addresses.
When you are finished with configuring DNS Relay for the WAN connection, click
on Apply. Go to the Configuration menu and click on Save config to save the new
settings into the CopperJet.
Note: You need to fill in the CopperJet IP address as DNS address on your
network card or configure the DHCP Server and enable the setting: Use Router as
DNS Server.
