Page 23
Alliance Appliances Pty Ltd
Rapid 26
COMMISSIONING
Check gas and water supply connections for leaks
1. Ensure electricity to the heater is turned off.
2. Fully open the cold water isolation valve.
3. Check the water pipe work for leaks.
4. Open the gas isolation valve fully.
5. Check the gas pipe work for leaks.
Check hot water flow and confirm pre-set delivery temperature
1. Plug in the water heater at the power outlet and switch on the electrical supply.
2. Open a hot tap.
3. The water heater will operate automatically.
4. Check there is sufficient flow from each connected hot tap to operate the water heater.
5. Confirm hot water delivery temperatures at closest tap using a thermometer.
Note 1.
Hold thermometer in the water flow and take reading when the temperature
stops rising.
