ALLIANCE Automaatic washer, Руководство по установке и эксплуатации

Страница: 15 / 32

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
13
210193
High Standpipe Installation
Place the adapter into the standpipe. Remove the
beaded tie-down strap from accessories bag and place
around standpipe and drain hose, approximately 30 cm
(12 inches) down from the top of pipe and tighten
strap to hold hose to standpipe. This will prevent the
drain hose from dislodging from drain receptacle
during use.
Figure 8
Low Standpipe Installation
No. 562P3 Siphon Break Kit is required for this type
of installation. This kit is available (as optional
equipment at extra cost) through an authorized dealer
or parts distributor. Installation instructions are
supplied with the kit.
Figure 9
TLW875N
1 Standpipe Adapter
2 Drain Hose
3 Tie-Down Strap
4 Standpipe (Standpipes higher than 122 cm
[4 ft.] are not recommended)
TLW875N
3
4
1
2
TLW876N
1 562P3 Siphon Break Kit
2 Drain Hose
3 Standpipe
3
1
2