ALLIANCE Automaatic washer, Руководство по установке и эксплуатации

Страница: 13 / 32

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
11
210193
Step 2: Wipe Out Inside of Washtub
Prior to first wash, use an all-purpose cleaner, or a
detergent and water solution, and a damp cloth to
remove shipping dust from inside of washtub.
Figure 3
Step 3: Connect Water Inlet Hoses
NOTE: Refer to section on Water Supply
Requirements before connecting water inlet hoses.
Hoses Without Metric Coupling
Insert rubber washers (from accessories bag) in water
inlet hose couplings (two hoses supplied with washer).
Connect inlet hoses to water supply faucets. Turn on the
water supply faucets and flush the lines for
approximately two minutes to remove any foreign
materials that could clog the screens in the water
mixing valve. (This is especially important when
installing your washer in a newly constructed or
renovated building.) Then connect the hoses to the hot
and cold valve connections at the rear of the washer.
Hoses With Metric Coupling
Connect the BLACK colored hose coupling end of
the inlet hoses (with filter washers) to the water supply
faucets. Then connect end of hoses (with rubber
washers) with the brass colored hose couplings to the
hot and cold water mixing valve connection at rear of
washer.
IMPORTANT: Thread hose couplings onto valve
connections finger tight, then turn 1/4 turn with
pliers. DO NOT cross thread or overtighten
couplings.
Figure 4
Figure 5
W371I
TLW872N
1 Water Inlet Hoses
2 Cold Water Connection
3 Hot Water Connection
W091I
1 Rubber Washer (Plain)
2 Inlet Hose
2
3
1
WATER
MIXING
VALVE
1
2
1