ALLIANCE ALLPH120R410-INV, Руководство по установке и эксплуатации

Страница: 22 / 27

Maintenance and Inspection
•
Check the water inlet and drainage often. The water and air inflow into the system should be sufficient
so that its performance and reliability does not get compromised. You should clean the pool filter regularly
to avoid damage to the unit caused by clogging of the filter.
•
The area around the unit should be spacious and well ventilated. Clean the sides of the heat pump
regularly to maintain good heat exchange and to save energy.
•
Check if all processes in the unit are operational and pay special attention to the operation pressure of
the refrigerant system.
•
Check the power supply and cable connections regularly. Should the unit begin to function abnormally or
should you notice a smell from an electrical component, arrange for timely repair or replacement.
•
Winterizing : make sure to drain all the water from the heat pump and other systems in order to prevent
frost damage. Damage caused by freezing is not covered by the warranty.
•
You should also purge the water if the unit will not work for an extended period of time. You should
check all parts of the unit thoroughly and completely fill the system with water before turning it on again
afterwards.
20