Alliance Laundry Systems HTE517, Руководство по программированию

Страница: 71 / 79

800000
69
Section XII
Rapid Advance Feature
The Rapid Advance feature allows the owner to
quickly advance through active cycles or advance into
a cycle from the default mode.
How to Enter Rapid Advance Feature
1. Control may be in an active cycle or in the default
mode to use the Rapid Advance feature.
NOTE: If in default mode, washer door must be
closed to start Rapid Advance cycle.
2. Open the service door. Refer to Section VI. While
pressing and holding the NORMAL keypad with
one hand, press the WARM keypad with the other
hand. The cycle will start in the wash fill/agitate
step.
While in the Rapid Advance Mode, pressing the
COLD temperature pad will advance the washer to the
next cycle step. The cycle indicator lights will tell
which cycle the washer is in.
For example: If the washer is in the first fill/agitate
cycle, pressing the COLD keypad will advance the
washer into the WASH PAUSE cycle.
Continue pressing the COLD keypad until the cycle is
completed.
How to Exit Rapid Advance Feature
1. Advance through the cycles until reaching the
default mode. See Figure 2.