Alliance Laundry Systems HTE517, Руководство по программированию

Страница: 17 / 79

800000
15
Section VI
Opening the Service Door
Manually programming the Electronic Control
requires the user to open and close the service door.
Opening and closing the service door trips a switch
allowing access to various programming options,
diagnostics and audit capabilities. The service door is located in the control panel. See
Figure 3.
Power must be connected within ten (10) minutes after
opening the coin vault or service door to save the
opening information along with the rest of the audit
information.
Figure 3
3
2
1
OPERATING INSTRUCTIONS
Select Wash Temperature
HOT, WARM, COLD.
Select Fabric Type
NORMAL, PERM PRESS, DELICATE.
Load Supply Dispenser (See Instructions Below).
Load Clothes.
Insert Coin(s) / Card.
To Start Washer-Close Door and Push Start. 1.
2.
3.
4.
5.
6.
Open Dispenser Door.
Load Supplies in Proper
Compartment (as Indicated).
Close Dispenser Door. 1.
2.
3.
Detergent
Liquid Bleach
Fabric Softener 1.
2.
3.
DISPENSER INSTRUCTIONS
685942
NORMAL
HOT
PERM
PRESS
WARM
DELICATES
COLD
FABRICS AND TEMPERATURES
TO START
PUSH CYCLE PAD
BY FLASHING LIGHT
WASHER
DOOR
LOCKED
Commercial Washer
505617
H086IE1B
SERVICE
DOOR