Alliance Laundry Systems HTE517, Руководство по программированию

Страница: 19 / 79

800000
17
Section VII
Entering the Special Mode
For programming, testing, and retrieving information
from the Electronic Control, it is often necessary to
enter the Special Mode by following the four simple
steps below.
How to Enter the Special Mode
1. Be sure the washer is in the default mode before
continuing to step 2. See Figure 2. If the washer is
in an active cycle, rapid advance through the cycle.
See the Rapid Advance feature (Section XII). If
coins have been entered, see the Clear Vend feature
(Section XIII).
2. Open the service door. See Figure 3.
3. While pressing and holding the NORMAL keypad
with one hand, press the HOT keypad with the
other hand.
4. The VFD display will show “SPC.” See Figure 4.
Figure 4
FABRICS AND TEMPERATURES
NORMAL
HOT
PERM
PRESS
WARM
DELICATES
COLD
C743IE3A
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE