Alliance Laundry Systems HTE517, Руководство по программированию

Страница: 21 / 79

800000
19
Section VIII
Programming the Electronic Control
What Can Be Programmed?
This feature allows the owner to program cycle
information, standard vend pricing, special vends and
others by using the keypads. The control must have the
manual mode enabled, which is the factory default.
The manual access can only be turned OFF and ON by
using the MicroWand IIIE. Refer to this section when
programming the Electronic Control.
This section offers a detailed description of all 34
options available to program.
Each description includes instructions on when and
why the option might be used and, more importantly,
how to program the option.
For more advanced users, a quick reference list of the
options available through the programming mode is
located on this page.
NOTE: The 3 letters in the Option column of the
Programmable Options List is what will show in the
VFD display when that option is selected.
*Options marked with an asterisk are for basic start-up
programming.
Programmable Options Available
# OPTION DESCRIPTION
*1
“Slg”
Audio Signal
*2 “HnC” Hot Wash # of Coins
*3
“AnC”
Warm Wash # of Coins
*4 “dnC” Cold Wash # of Coins
5
“SPA”
Special Vend A Days enable
6 “SAS” Special Vend A Start Time
7
“SAE”
Special Vend A End Time
8 “SHC” Special Vend A Hot Wash # of Coins
9
“rnC”
Special Vend A Warm Wash # of
Coins
10
“CnC”
Special Vend A Cold Wash # of Coins
*11 “nAg” Normal Wash Agitate Time
*12
“nrg”
Normal Rinse Agitate Time
*13 “nEg” Normal Extra Rinse Agitate Time
*14
“nFg”
Normal Final Rinse Agitate Time
*15 “PAg” Permanent Press Wash Agitate Time
*16
“Prg”
Permanent Press Rinse Agitate Time
*17
“PEg”
Permanent Press Extra Rinse Agitate
Time
*18
PFg”
Permanent Press Final Rinse Agitate
Time
*19 “dAg” Delicates Wash Agitate Time
*20
“drg”
Delicates Rinse Agitate Time
*21 “dEg” Delicates Extra Rinse Agitate Time
*22
“dFg”
Delicates Final Rinse Agitate Time
23 “COI” Coin Value (set at 025 value)
24
“dCS”
Default Cycle Select
25 “rPF” Reset After a Power Failure
26
“Ern”
Extra Rinse (0 = Off, 128 = On)
27 “rrn” Warm Rinse (0 = Off, 128 = On)
28
“CFg”
Configuration Byte
29 “Cln” Set Real-Time Clock (minutes)
30
“CHr”
Set Real-Time Clock (hours)
31 “CdA” Set Real-Time Clock Day
32
“CdE”
Set Real-Time Clock Date
33 “COn” Set Real-Time Clock Month
34
“CYr”
Set Real-Time Clock Year