Alliance Laundry Systems HTE517, Руководство по программированию

Страница: 65 / 79

800000
63
Section IX
Collecting Audit Information
This feature allows the owner to retrieve audit
information stored in the washer by pressing a
sequence of pads on the control. For an explanation of
the audit options available, see the Audit Options List
on this page.
How to Enter Audit Feature
1. Control must be in “Special Mode” to start. Refer
to Section VII.
2. While pressing and holding the NORMAL keypad
with one hand, press the DELICATES keypad with
the other hand.
3. The VFD will change from “SPC” to “CyC.” See
Figure 106. “CyC” is the first Audit Option.
If the procedure did not work, the control will return to
the default mode. See Figure 2.
How to Read Audit Data
1. Use the DELICATES (+) or COLD (–) keypads to
scroll through various options until the desired
option is displayed in the VFD. Refer to the Audit
Options List, Chart 6, for an explanation of the
audit options available. See Figure 107.
Chart 6: Audit Options List
Figure 106
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C137IE1B
Figure 107
#
VFD
Display
Description
1 “CyC” Total # of machine cycles
2
“CnS”
Total # of coins
3 “HCC” Total # of HOT cycles
4
“rCC’
Total # of WARM cycles
5 “CCC” Total # of COLD cycles
6
“ACH”
Total # of Special Vend A HOT cycles
7
“ACr”
Total # of Special Vend A WARM
cycles
8 “ACC” Total # of Special Vend A COLD cycles
9
“COP”
Total # of coin vaule openings
10 “dOP” Total # of service door openings
11
“PFL”
Total # of power failures
12 “dnL” Total # of downloads
NORMAL
HOT
DELICATES
COLD
PERM
PRESS
WARM
Press this pad (enter)
to choose a selected
value or option
Press this pad (+)
to scroll forward
Press this pad (-)
to scroll back
C138IE1B