Allflex AWR300 User Guide
13/11/19
Page 4
2.4
Exchanging the Battery Pack
Although not normally required because of long operating time of the battery pack, it is
possible to change it. This might be necessary if the pack has reached the end of its life cycle.
Remove the flat-head-screws by
using the provided screwdriver.
Lift the battery cover and take
out the battery. After the new
battery pack has been inserted,
close the battery cover again and
tighten the two flat-head-
screws.
3
Controlling the AWR300
The AWR300 has a large color display and seven keys used for controlling the device.
•
The Reader is activated by pressing the key in the middle of the directional pad.
3.1
AWR300 Display
Home Screen
After the reader is switched on, the following home screen appears:
•
The battery status indicator shows the approximate battery level. In this example the
battery is fully charged. It would also display possible faults concerning the battery,
like high-temperature.
Battery
status
indicator
Current time
Current function of
the left soft-key
Current function of
the right soft-key
Connection status
USB, BT, RS232,
WLAN
