Allflex AWR300 User Guide
13/11/19
Page 26
Screen
Details
The screen shows the reader is trying to connect to the
Bluetooth printer. When the connection is established,
printing starts immediately.
If there is a lot of data to be printed, a progress bar is visible.
The AWR300 returns to the printer menu afterwards.
Select Group
You can select a specific group to print the data, rather than the last one or all groups.
Screen
Details
Select the group to be sent to the printer using the /
keys and confirm with .
If the Bluetooth connection has not been established yet,
the AWR300 tries to connect to the mobile printer.
If the connection to the printer is established, printing will
start right away.
When printing is finished, the reader returns to the screen shown above.
Print All Groups
You can select to print all the memory content,. The procedure is similar to ‘
Print Last Group
’.
No further selections are required.
Print Barcode
It is also possible to print the barcode of a particular EID. This is useful if you want to label
blood samples, for example. To be able to print the EID as a barcode, the AWR300 has to read
the transponder first. When you select ‘
Print Barcode
’, the device activates the RFID engine.
After the tag has been read, the AWR300 sends an appropriate command to the mobile
printer.
