Allflex AWR300 Скачать руководство пользователя страница 43

Страница: 43 / 53

Allflex AWR300 User Guide

13/11/19

Page 39

Screen

Details

Use the / keys to change the character and the /

keys to move to the previous / next digit. When browsing

through the list of characters, you can hold down the or

key in order to increase the scrolling speed.

The key deletes the last digit. If you hold it for at least one

second, all digits will be erased.
Press the key to set the passkey.

The menu item ‘

Bluetooth Info

’ shows:

•

Bluetooth hardware and firmware related information

•

The configured Bluetooth Mode & Profile

•

The connection status

Details concerning the color of the Bluetooth symbol depending on the connection status are

explained in Chapter

Error! Reference source not found.

3.1.2.3.

Screen

Details

•

BD Address

: Bluetooth Device Address of the AWR300s

Bluetooth module, unique worldwide.

•

Module

: Bluetooth model, built into the reader; here:

‘BT43’.

•

Build Version

: AWR300s Bluetooth module Firmware

version

•

Mode

: Bluetooth Mode plus Bluetooth Profile in

brackets.

•

Status

: Connection Status, here: tries to connect to

remote device.

In this case, the AWR300 is connected to the remote device.

If the connection is lost, the reader attempts to reconnect

to the configured Bluetooth partner until it successful. This

is done automatically.

Here the AWR300 is configured to be the Bluetooth Slave. It

is discoverable by other devices and it is connectable. The

reader does not try to connect to a remote device in this

configuration, but waits for incoming connections.

Содержание AWR300






















































Результаты поиска

Содержание AWR300

Отзывы:

Похожие инструкции для AWR300

Бренды по названию

Популярные бренды

Allflex AWR300, Руководство пользователя

Результаты поиска

Содержание AWR300

Отзывы:

Похожие инструкции для AWR300

Бренды по названию

Популярные бренды