allen AT-16, Руководство по эксплуатации и запасным частям

Страница: 32 / 104

056841 - 01/2013
SECTION 2
OPERATIONS
Page 2-2
Pre-Operating Instructions
Before operation each day ensure the following:
• All guards, side screens and panels are in place.
• All safety and information signs are in place and legible.
• Engine and hydraulic oil levels are correct.
• Check battery level
• Check for hydraulic leaks.
• Check all operating controls for proper operation and adjustment.
• Check speed control operation before and after starting engine for proper operation.
• Transmission oil level. Add oil as required.
• Rubber track is in good condition and working properly.
• Hand operated brake for proper operation.
• The steering, left and right.
Note: If there is any indication that faulty equipment exists, shutdown safely, inform the proper authority
and DO NOT operate the power buggy until the problem has been fi xed.
• Remove loose objects that could interfere with operation.
Learn as much as possible about the work area before operation. Walk around the worksite and inspect
the terrain that you will be traveling on.
Make a note of surfaces to be avoided, including:
• Holes, Drop-offs, Banks, Ditches, Trenches, Slopes, or Undercut High Banks.
• Obstacles.
• Soft mud and standing water.
• Oil spills and slippery surfaces.
Note: If any of the above conditions exist in the work area, correct the condition before operating. If the
condition cannot be corrected, avoid operation in the problem area. When operating on docks, ramps,
or fl oors, check for weak spots. Clear away trash and debris. When required, check the power buggy’s
maximum fully loaded ground pressure weight if operating on a hollow fl oor system.