allen AT-16, Руководство по эксплуатации и запасным частям

Страница: 37 / 104

056841 - 01/2013
SECTION 2
OPERATIONS
Page 2-7
Operating Instructions - cont’d
Keep personnel clear of the buggy during travel.
Do not allow anyone to stand/pass in front of the buggy during travel.
Do not approach personnel standing in front of fi xed objects. Do not allow others to ride on the buggy.
Test the controls for proper operation. Be certain you can control both speed and direction before mov-
ing.
Keep both hands on the steering handle during travel.
Avoid sudden starts, stops and direction changes.
Ensure that all surfaces are capable of supporting the buggy and load.
Look for and avoid oil spills, wet or slippery surfaces that may cause loss of control.
Maintain clearances from obstacles.
Make sure aisle, ramps, doorways and passages are clear.
Operate the controls smoothly. Don’t jerk the steering control.
Avoid sudden stops, starts, turns, or changes in direction.
NEVER cowboy or play games with the machine.
NEVER attempt to work the controls except from operator’s position at the rear of the machine.
NEVER leave the power buggy unattended with a bucket or platform in the raised position.
Important: If the engine has been under heavy load, operate the engine at 1/2 to 3/4 throttle for three to
fi ve extra minutes before stopping the engine. Cool down applied when needed will extend engine life.
Slow down for turns, ramps, dips, uneven, or slippery surfaces and in congested areas.
Avoid excessively steep slopes or unstable surfaces. If you must drive on a slope, proceed with ex-
treme caution.
DO NOT , under any circumstances, drive across excessively steep slopes.