allen AT-16, Руководство по эксплуатации и запасным частям

Страница: 44 / 104

056841 - 01/2013
SECTION 3
SERVICE
Page 3-4
Air Filter Maintenance - cont’d
Paper Element Maintenance Procedure
Every 100 operating hours (more often under extremely dusty or dirty conditions) clean or replace the
paper element as follows:
• Raise the bucket.
• Unlatch and remove the engine housing cover and access the air filter from the front. Remove wing
nut, air filter cover and paper element with foam pre-cleaner.
• Remove foam pre-cleaner from paper element.
• Clean the foam pre-cleaner following the Pre-Cleaner Maintenance Procedure.
• Tap the element lightly several times on a hard surface to remove excess dirt, or blow compressed
air through the filter from the inside out. NEVER try to brush the dirt off; brushing will force dirt into the
fibers. Replace the paper element if it is excessively dirty with Part# 45 083 02 .
• When dirty or damaged, replace with the correct part number filter element. Carefully handle new ele -
ment– DO NOT use if surfaces are damaged.
• With air filter disassembled, check the filter base plate to make sure it is secure, not bent or damaged.
Check the cover and paper element seals. Damaged components could allow unfiltered air into engine
causing premature wear and failure.
• Install the oiled, foam pre-cleaner around the paper filter element.
• Install the air filter, air filter cover and wing nut. The wing nut must be finger tightened 1/2 to 1 full turn
after the nut contacts cover.
DO NOT
overtighten.
• Install the engine housing cover.
• Lower the bucket.