manualshive.com logo in svg

allen AT-16, Руководство по эксплуатации и запасным частям

Поделиться
Скачать
allen AT-16 Скачать руководство пользователя страница 18

056841 - 01/2013

SECTION 1

SAFETY

Page 1-4

1.1 Safety Information

Do not operate or service the equipment before reading the entire manual. Safety precautions should 
be followed at all times when operating this equipment. Failure to read and understand the safety mes-
sages and operating instructions could result in injury to yourself and others.

SAFETY NOTES

The four safety notes shown below will inform you about potential hazards that could injure you or oth-
ers. The safety notes speci

fi

 cally address the level of exposure to the operator and are preceded by 

one of four words: DANGER, WARNING, CAUTION or NOTICE.

Indicates a hazardous situation which, if not avoided,

will

 result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could

 result in death or serious injury.

Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.

Addresses practices not related to personal injury.

Содержание AT-16









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды