allen A-71100-BR Скачать руководство пользователя страница 58

Страница: 58 / 92

Allen® Advance Table User Manual (D-720686-A6)

WARNING:

Do not use the support top without the cross pins installed correctly
through the H-brackets. To do so could cause patient fall, injury, or
equipment damage.

Make sure

that—

–

All cross pins are correctly installed into the H-brackets and
support tops.

–

The drop lock on the end of the cross pins has moved to the
side to hold the support tops and H-brackets in position.

Loosely install a minimum of four safety straps evenly spaced and
around both support tops.

NOTE:

We recommend that you use the four Allen® Safety Straps that were
included with the support top.

Make sure the support tops are in the correct position, and then
tighten the safety straps.

Make sure the superior support top is progressively compressed
against the patient and once again tighten the safety straps.

Look at the display, and make sure the

Tilt Level

indicator and the

Brakes

Locked

indicator are

green

Содержание A-71100-BR





























































































Результаты поиска

Содержание A-71100-BR

Отзывы:

Похожие инструкции для A-71100-BR

Бренды по названию

Популярные бренды

allen A-71100-BR, Руководство пользователя

Результаты поиска

Содержание A-71100-BR

Отзывы:

Похожие инструкции для A-71100-BR

Бренды по названию

Популярные бренды