Allen-Bradley The PowerFlex 755 On-Machine, Руководство пользователя

Страница: 186 / 218

186 Rockwell Automation Publication 750-UM006C-EN-P - March 2022
Chapter 6 Troubleshooting
By using a web browser to access the IP address set for the adapter, you can view
the adapter web pages for information about the adapter. You can also view
information about the drive, and other DPI™ devices connected to the drive,
such as HIMs or converters.
By default, the adapter web pages are disabled. To enable the adapter web
pages, set
13:52 [Web Enable] to 1 (Enabled) and then reset the adapter for
the change to take effect.
For more details on the web pages for the adapter, see PowerFlex 755 Drive
Embedded EtherNet/IP Adapter User Manual, publication
750COM-UM001 .
The adapter can be configured to send email messages automatically to desired
addresses when:
• Selected drive faults occur and/or are cleared
• The adapter takes a communication or idle fault action
Bit 0 of 13:53 [Web Features] is used to help protect the configured settings
for email messaging. By default, settings are not protected and changes can be
made.
• To help protect configured settings, set the value of Email Cfg Bit 0 to 0
(Disabled).
• To remove protection from the configuration, change Bit 0 back to 1
(Enabled).
Email messaging always remains active regardless of whether its settings are
protected—unless email messaging was
never configured. For more
information about the configuration of adapter email messaging or to stop
email messages, see PowerFlex 755 Drive Embedded EtherNet/IP Adapter
User Manual, publication
750COM-UM001 , Configure Email Notification
Web Page.
Value Description
0 Disabled (Default)
1 Enabled
ESC

ENTER
Stopped
0.00 Hz
AUTO
F
▲ ▼
Edit Web Enable
Disabled 0
0 << 1
Bit Description
0 Email Cfg (Default = 1 = Enabled)
1…15 Not Used
ESC ENTER
Stopped
0.00 Hz
AUTO
F
 
Edit Web Features
xxxx xxxx xxxx xxx1
Email Cfg