3 Mounting the terminal
© 2022 Interflex Datensysteme GmbH | IF-5835 Time Recording Terminal | 07.22
9
3
Threaded bolt for securing the PoE
connector
4
Threaded bushing for fastening an
optional I/O controller board
(75-700-0141)
5
Bore holes for mounting via appliance
case
6
Plain washer
7
Flush box
Fastening the back panel of the housing directly to the wall
Fasten the back panel of the housing only to an even surface.
If the cables are surface-mounted, a spacer (75-5735-00xx) is required.
u
Screw the back panel of the housing to the wall through the holes
2
using the three screws
provided.
Fastening the back panel of the housing via an appliance case
If you are using an appliance case, you will need the two washers (shown in the figure) to prevent
the back panel of the housing from being bent.
u
Screw the back panel of the housing to the wall through the holes
6
and the washers
7
using
the two screws provided.
