System Overview
3
2 System Overview
Figure: Configuration example using 3 IF-5735 master terminals
The IF-57xx master terminal and the PoE terminal board are connected by a 14-pin ribbon cable. The
power supply as well as the connection to the data lines takes place via this ribbon cable.
To comply with the required EMC values, the IF-57xx requires functional grounding.
2.1 IF-57xx terminal family
The IF-57xx terminal family consists of three different types.
All terminals can read data from state-of-the-art RFID credentials.
Power is supplied via a low-voltage supply unit or PoE.
IF-5735-0xxx:
records time data, such as e.g. IN/OUT bookings or absence reasons.
displays accounts calculated by the IF-60x0 time recording/access control program or provided by
SAP.
handles functions of the time recording/access control program.
writes offline (NetworkOnCard) data onto credentials.
Allows for connection of an I/O controller board (optional, additional hardware required).
allows for connection of up to 3 slave terminals (optional, additional hardware required).
IF-5725-0xxx:
records time data, such as e.g. IN/OUT bookings or absence reasons.
displays account information.
handles functions of the time recording/access control program.
does not write offline (NetworkOnCard) data onto credentials.
does not allow for the connection of slave terminals.
does not provide access with PIN verification.
does not allow connection of I/O interface expander.
IF-5721-0xxx:
records access bookings.
writes offline (NetworkOnCard) data onto credentials.
allows for the connection of a terminal via an interface expander that is included in delivery.
allows connection of up to 3 slave terminals.
provides access with PIN verification.
does not display accounts.
