Alinco DR-735T/E, Инструкция по эксплуатации

Страница: 62 / 84

60
Useful functions
3. Rotate a dial to select either SKIP or ♥ for
favorite.Press V/M key to save. The icon
will stop
À ashing. Repeat above 2 again
to cancel the setting. The icon will
disappear.
4. Select SKIP or FAV in set mode menu 05
and perform the memory scanning.
3URJUDPPHG6FDQ
This is a type of VFO scan, and scans only the designated frequency range of the VFO sets
into the P*A and P*B channels, This feature is refered to as “Search” and can be set 5 pairs in
each band.
This program scan will operate under VFO setting, regardless of memory setting of the
P*A/P*B memory setting.
P1A P1B
Airband VHF UHF
P2A P2B P3B P4A P3A P4B P5A P5B
1. Enter the VFO mode and set the P
{
A and
P
{
B frequencies into the designated
memory channels. Refer to Memory
setting P.23 for details. It doesn’t matter
which is higher and lower limits, but you
should always make a pair to determine
the edge of scanning range.
2. Return to the the VFO mode by pressing
the V/M key of the band to be scanned.
3. Press FUNC key and while F icon is
displayed, press the dial. PS- and a
number appears.
4. Rotate the dial or UP/DOWN keys on the
microphone to select a pair number.
Press the dial to start scanning.
5. Press any key other than the UP/DOWN
keys to stop.
NOTE
Programmed scan can't be performed in both bands at the same time.
Program Scan is going