30
REV:
In standby, press the key programmed
as
"
REV
"
function to turn-on or turn off
Frequency Revrse function.
CALL:
CALL channel switch, in standby press
the key programmed as
"
CALL
"
function to switch between CALL
channel and current channel.
MAIN:
Main band switch, in standby press the
key programmed as
"
MAIN
"
function to
choose left band or right band as Main
band.
VFO/MR:
Working mode switch, in standby,
press the key programmed as
"
V F O / M R
"
f u n c t i o n t o s w i t c h
between channel mode and frequency mode.
SCAN:
Scan function, in standby, press the
key programmed as
"
SCAN
"
function
to start channel scan or frequency
scan.
SQL OFF:
Turn off Squelch, in standby, press
the key programmed as
"
SQL
OFF
"
function to turn off squelch,
you can hear very weak signal, repeat the above function to
turn on squelch.
TBST:
Transmit tone burst, in standby, press
t h e k e y p r o g r a m m e d a s
"
T B S T
"
function to transmit selected tone burst.
This function is use to wake sleeping repeater.
CALL OUT:
Calling, in standby, press the key programmed as
"
CALL
OUT
"
function to transmit pre-
programmed DTMF, 2TONE,
5TONE code.
COMP:
Compander function in standby, press
the key programmed as
"
COMP
"
to
turn on or turn off Compander function.
SCR:
Scrambler function, in standby, press the key programmed as
"
SCR
"
function to check Scrambler
function. The optional scrambler groups
(from 9 fixed groups and 2 self defined
groups).
TONE DEC:
Add Optional Signaling, in standby
p r e s s t h e k e y p r o g r a m m e d
as
"
TONE DEC
"
function to choose
DTMF(DT), 2TONE(2T), 5TONE(5T) or OFF.
W/N:
Wide or narrow band setup, in standby,
press the key programmed as
"
W/N
"
function to choose Wide band, middle
and narrow band.
TALK:
In standby status, press programmed
Talk key to enable and disable Talk
around function.
OFF:
No function.
Microphone Operation
7
