4
3
Red
Black
Initial Installation
When the ignition key is turned to ACC or ON position with the
81
radio's power switch on, the unit turns on automatically and the
power switch will be lit. Turn the ignition key to OFF position or
manually turn the power switch off to shut down the radio.
Use of ignition-key ON/OFF feature drains 5mAh of current from the
91
battery as long as the EDC-43 is being connected.
voltage) ignition system/cables.
After installing cable, in order to avoid the risk of damp, please
21
use heat-resistant tap to tie together with fuse box. Don't forget to
reinforce whole cable.
In order to avoid the risk of short circuit, please cut down connection
31
with negative (-) of battery, then connect with radio.
Confirm the correct polarity of the connections, then attach the
41
power cable to the battery terminals; red connects to the positive (+)
terminal and black connects to the negative (-) terminal.
Never remove the fuse holders from the cable.
Reconnect any wiring removed from the negative terminal.
51
When the ignition key is turned to ACC or ON(Start) position with the
71
radio turned off, the power switch illuminates. The illumination will be
turned off when the ignition key is turned to the off position. To turn
on the unit, press the power switch manually while it is illuminated.
(While ignition key is at ACC or ON position)
Connect the DC power cable to the transceiver's power supply
61
connector.
Press
the connectors firmly together until the locking tab clicks.
If the ignition-key on/off feature is desired(optional feature), use
the optional EDC-43(For Cigar-Plug connection) cable. Connect
one of the cables between the ACC terminal or a Cigar-Plug that
operates with the vehicle ignition or ACC switch on the vehicle and
EXT POWER jack on the rear side of the unit.
Ext. Power jack
DC power cable
Ext. Power jack
ACC terminal
Cigar-Plug connection
Optional EDC-43 required
In order to use this transceiver for fixed station operation, you will need
a separate 13.8V DC power supply (not included), Please contact local
dealer to require.
Fixed Station Operation
