Alinco DR-638, Инструкция по эксплуатации

Страница: 33 / 47

22
6
Press and hold
11
key until activating
the function menu. Rotate the dial or use
[UP/DOWN] keys to select the menu 26
NAME C and press the dial so that the last
digit starts flashing. Up to 7 characters can
be registered in each memory channel.
Turn the dial to select desired first character. Press the dial again to
21
edit the next. Press key to store values and exit the setting menu.
Press PTT to set and exit or press the dial to set and continue.
31
MENU 26: EDITING MEMORY NAME
Parameter Setting Mode (SET MODE)
The time-out timer limits the amount of continuously transmitting time.
When the transmitting reaches the selected TOT value, the transmission
will be automatically cut off and emits warning beep.
Press and hold
11
key until activating the function menu. Rotate
the dial or use [UP/DOWN] keys to select the menu 27 TOT and
press the dial.
Rotate the dial or use
21
[UP/DOWN] keys to
select the value:
1-30 Minutes, total of 30 setting parameters.
OFF: TOT is turn off.
Press [
31 PTT]
to set and exit or press the dial to set and continue.
MENU 27: TIME-OUT TIMER(TOT)
Press and hold
11
key until activating
the function menu. Rotate the dial or
use
[UP/DOWN] keys to select themenu
No.28-31 menu The LCD displays " PG
PA ", " PG PB ", " PG PC ", " PG PD " and
press the dial.
MENU 28-31: MICROPHONE PA,PB, PC,PD kEY SETUP
4-5 minutes is common and recommended.
NOTE
Press and hold
11
key until activating the function menu. Rotate
the dial or use [UP/DOWN] keys to select
the menu 25 MUTE and press the dial.
Rotate the dial or use
21
[UP/DOWN] keys to
select the value:
Tx: When the Main band is transmitting,
the sub band receive is mute.
Rx: When the Main band is receiving, the
sub band receive is mute.
Rx/Tx: Suspends the sub band receive at any time.
Press [
31 PTT]
to set and exit or press the dial to set and continue.
MENU 25: SUB BAND MUTE
be exchanged, the CTCSS DCS signaling
also will be exchanged if existed in current
channel.
OFF: Turn off Frequency Reverse.
Press [
31
PTT]
to set and exit or press the dial to set and continue.
Rotate the dial or use
21
[UP/DOWN] keys to select wanted value.
Press
31
[
PTT]
to set and exit or press the dial to set and continue.
For Menu details, please refer to Page 29-30, Microphone Operation.
NOTE