Alinco DR-638, Инструкция по эксплуатации

Страница: 35 / 47

24
Press and hold
11
key until activating the function menu. Rotate
the dial or use [UP/DOWN] keys to select the menu 37 DISPLAY and
press the dial.
Rotate the dial or use
21
[UP/DOWN] keys to
select the mode:
F R E Q : D i s p l a y s c h a n n e l n u m b e r +
frequency in memory mode and switches
to VFO mode by pressing
key.
CH: Displays only memory channel
numbers.
NAME: Displays channel name
tags in memory mode and switches to
VFO mode by pressing
key.
Press and hold
11
key until activating the function menu. Rotate the
dial or use [UP/DOWN] keys to select the
menu 38 REPLOCK and press the dial.
Rotate the dial or use
21
[UP/DOWN] keys to
select the mode:
RLORP: Signaling BCLO, transmitting is inhibited when a signal with
different CTCSS/DCS setting is being
received.
RLOBU: Transmitting is inhibited when a
signal of any kind is being received.
OFF: BCLO is disabled.Transmitting is
allowed in any receiving status.
Press [
31 PTT]
to set and exit or press the dial to set and continue.
The difference between the transmitting and receiving frequencies for
repeater operation is called shift or offset frequnecy.
Press and hold
11
key until activating
the function menu. Rotate the dial or use
[UP/DOWN] keys to select the menu 36
SHIFT and press the dial.
Rotate the dial or use
21
[UP/DOWN] keys to
select desired value between 0 and 100MHz.
Press [
31 PTT]
to set and exit or press the dial to set and continue.
MENU 37: DISPLAY MODE
MENU 38: BUSY CHANNEL LOCkOUT(BCLO)
MENU 36: OFFSET FREQUENCY
6 Parameter Setting Mode (SET MODE)
Press and hold
11
key until activating the function menu. Rotate
the dial or use [UP/DOWN] keys to select the menu 39 DTMF ID and
press the dial.
The DTMF self ID is shown on the display.
21
Press [
31 PTT]
to set and exit or press the
dial to set and continue.
MENU 39: DTMF SELF ID ENQUIRY
Press [
31 PTT]
to set and exit or press the dial to set and continue.
M S N : S c a n s o n l y P r i o r i t y m e m o r y
channels in the channel scanning mode.
Press [
31 PTT]
to set and exit or press the
dial to set and continue.
Press and hold
11
key until activating the function menu. Rotate
the dial or use [UP/DOWN] keys to select the menu 40 5TONE ID
and press the dial.
MENU 40: 5-TONE SELF ID ENQUIRY