ALIBI ALI-NT2002R, Руководство пользователя

Страница: 82 / 105

74
SECTION 4: EVENT SETUP
4. When the person exits, Click

to stop auto calibration.
Enable
Verification
Verification:
1. Click the Enable Verification button. In the graphic above, the button is shaped like a measuring square.
Notes :
•
Verify not only person, but also other objects appeared in the view. Such as car, street lamp, etc.
•
The verifying result value is only the height of the line. The horizontal width is not measured.
2. Click the Vertical Verify button, and drag a vertical line in the view.
3. Click the Calibration button to calculate the length.
4. Compare the calculated line length to the actual length to verify the calibration settings.
NOTE
If the Auto Calibration failed, or the verified result turns bad, click Fig 1 to Fig 4 to examine whether they are valid person/object in the
figures. If so, refer to the Manual Calibration.
TASK 2: Manual Calibration Steps:
1. Check Manual Calibration select box.
2. Select
Fig 1
.