METRO POWERPOD™ SYSTEM —
INSTRUCTIONS FOR USE
loud) and the display will flash every 3 seconds. Both can be stopped by pressing the “Mute” button.
• When battery capacity is 5% or less, the alarm beeps (if sound set to soft or loud) and the display blinks every 3
seconds. The audible alarm can be
muted for one minute
by pressing the “MUTE” button. The display will continue to
blink. The battery should be charged at this time to prevent unwanted shutdown.
• To turn system off
(disable power)
, press and hold Mode button until the display goes blank.
• To turn system on
(enable power)
, press and hold Mode button until the display lights up.
DISASSEMBLY OF POWER SUPPLY FROM CART
WARNING:
Before disassembly, power cord must be disconnected from the wall outlet.
NOTE:
Disconnect all wire harness and electrical cords from power supply.
• Loosen the lock screw and remove any security seal (if present) from the front of the PowerPod™ drawer
(See
Image 2
).
• Slide the drawer latch to the left to unlock the PowerPod™ drawer.
• Open drawer and disconnect the battery / power supply cable (See
Image
3
).
10
www.metro.com
L01-622
REV 06/19
Image 2: Front of PowerPod™
Image 3: Battery/Power Supply Cable
