background image

 

(Safety, cont.) 
 

• 

When  lighting  a  burner,  always  pay  close  attention  to  what  you  are  doing.    Be  certain  you  are  de-
pressing the correct igniter button labeled for the burner you intend on using. 

 

• 

When using  the  Side  Burner  do  not  touch  the  Side  Burner  grate  or  immediate  surrounding  area  as 
these areas become extremely hot and could cause burns. 

 

• 

For  proper  lighting  and  performance  of  the  burners  keep  the  ports  clean.  It  is  necessary  to  clean 
them  periodically  for  optimum  performance.  The  burners  will  only  operate  in  one  position  and  must 
mounted correctly for safe operation. 

 

• 

Clean the Side Burner with caution.  Avoid steam burns; do not use a wet sponge or cloth to clean 

the Side Burner while it is hot.  Some cleaners produce noxious fumes or can ignite when applied to 
a hot surface. 

 

• 

INSECT  WARNING: Spiders and insects can nest in the burners of this Side Burner and cause the 
gas to flow from the a wrong of the burner. This is a very dangerous condition, which can cause a fire 
to occur behind the valve panel, thereby damaging the Side Burner and making it unsafe to operate. 
Inspect the Side Burner at least twice a year. 

 

• 

Be sure all Side Burner controls are turned off and the Side Burner is cool before using any type of 
aerosol cleaner on or around the Side Burner. The chemical that produces the spraying action could, 
in the presence of heat, ignite or cause metal parts to corrode. 

 

• 

Do not operate the Side Burner under unprotected combustible construction. Use only in well ventilat-
ed areas. Do not use in buildings, garages, sheds, breezeways or any enclosed areas. 

 

• 

Keep  the  area  surrounding  the  Side  Burner  free  from  combustible  materials,  trash,  or  combustible 
fluids  and  vapors  such  as  gasoline  or  charcoal  lighter  fluid.  Do  not  obstruct  the  flow  of  combustion 
gases and ventilation airways. 

 

• 

Keep the back of the cart free and clear from debris (cart model). 

 

• 

If the unit is stored indoors ensure that it is cool. If propane is used, the cylinder must be unhooked 
and the propane cylinder stored outside in a well-ventilated area, out of reach of children. 

 

• 

Never  use  the  Side  Burner  in  windy  conditions.  If  located  in  a  consistently  windy  area,  oceanfront, 
mountaintop, etc... a windbreak will be required. Always adhere to the specified clearances. 

 

• 

Keep any electrical supply cord, away from the heated areas of the Side Burner. 

 

WARNING

 

FOR OUTDOOR USE ONLY 

NOT  TO  BE  INSTALLED  IN  OR 
ON  RECREATIONAL  VEHICLES 
AND / OR BOATS.

 

WARNING

 

NEVER USE A DENTED OR 

RUSTED LIQUID PROPANE 

TANK. SHUT OFF TANK 

WHEN NOT IN USE.

 

Содержание ALSB-2





















Отзывы: