7
SAFETY INSTRUCTIONS
• The hydraulic pump is designed for a pressure of 700 bar (ca. 10.000 p.s.i.). Ensure that all connected
components (connections, cylinders, valves) are compatible with this maximum pressure rating.
• The dismantling, the re-assembly and the operation of the pump are only to be carried out by trained
personnel who know the system.
• Any work on the hydraulic hoses connected to the pump has to be made when there is no pressure
in those components. The air supply has to be closed and all hoses have to be relieved.
• The reservoir of the air-hydraulic pump should be filled with oil only when the cylinders are in fully
retracted position. If not, oil flowing back will overcharge the reservoir and cause damage or even
destroy the pump.
!
SPECIFIED CONDITIONS OF USE
This device, with a maximum operating pressure of 700 bar, is destined to drive single acting
hydraulic cylinders.
EN
TECHNICAL DATA
Prod.-No. and Description
02140 LHP 700
Maximum operating pressure
700 bar
Air pressure
2,8 - 8,0 bar
Output flow
0,8 - 0,1 l/min
Oil volume usable
Laying down:
Standing up:
2,4 / 2,1 l
2,2 / 1,5 l
Air connection
G 1/4"
Oil connections
3/8” – 18 NPTF
Weight
7 kg
Noise level
75 dB(A)
Length of the hydraulic hose
2,8 m
