ALFATRON ALF-5/10/12/20X/30X-CAM
6
1.1 Camera Interface Explanation
Figure 1.1 Interface of HD BaseT Series
1. Camera Lens
6. RS232 (In)
2. Camera Base
7. Audio in
3. Remote Controller Receiver Light
8. HDBaseT Port
4. DIP Switch
9. LAN Port
5. Tripod Screw Hole
10. Power Supply
1.2 Power on initial configuration
1) Power on: Connect DC12V power supply adapter with the power supply socket.
2) Initial configuration: Power the device on with the remote control, the front panel light will flash red. The camera head then
moves down and rotates left. The camera head then goes to the HOME position, front and centre. When the remote control receiver
light stops blinking and turns green, the self-checking is complete.
Note: If you set preset 0, when Power-on self-test is completed, the camera automatically moves to the preset 0 positions.
1.3 Video Output
HDBaseT video output
a. IP cable connect: HD model pls refer to figure 1.1 No.8 above.
b. Connect the PTZ Camera to the copmpatible Alfatron HDBaseT receiver using a compatible HDBaseT network cable.
